Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


DEK Printers

#27394

DEK Printers | 27 February, 2004

Is it true that a DEK printer will not accept a standard 20X20 stencil. I have heard that the image on the stencil is offset as well.(you need special stencils just for DEK printers?)

Do they make an adapter to accommodate standard 20X20's with centered images ?

reply »

#27395

DEK Printers | 27 February, 2004

Looking in my DEK 265 LT manual, frame size external is 29 by 29 by 1.6 in. 26 by 26 internal, and printing to within side of frame = 75 mm.Hope this helps.

reply »

#27396

DEK Printers | 27 February, 2004

To simplify; Can I take a 20X20 stencil with a centered image off my shelf and drop it into a DEK printer.

OR...Does DEK require a special stencil like Fuji's do ?

reply »

#27398

DEK Printers | 27 February, 2004

DEK can take the 20x20 frame with an adapter. Stencil image is center justified. Contact DEK for p/n and price for adapter.

reply »

#27400

DEK Printers | 27 February, 2004

Hey, I just got off the phone with DEK. A 20 by 20 stencil will not drop right in, they do make a fixture so you can use a 20 by 20. Call DEK at 908-782-2363 talk to Ron. Later

reply »

#27405

DEK Printers | 27 February, 2004

A 20 x 20 frame with the image centered will drop in IF you have a printer with adjustable rails for the stencil, the rails move in and out to accomodate 29 x 29 to smaller than 20 x 20. Otherwise, you will need the adapter.

James

reply »

SMT in-printer dispensing

Plasma Prior to Conformal Coating