Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Conductive Adhesives and flip chip

Ashok Thiyagarajan

#27198

Conductive Adhesives and flip chip | 11 February, 2004

HI

I am currently having a wafer which is stud bumped (Au), I am printing conductive adhesives (with silver fillers) on the pads , and by thermocompression bonding, I am establishing the connnection between. But right now the problem is the silver flakes oxidises in exposer to air. So , i right now need a simple test to calculate the amount to silver which oxidises and i should be able to predict the life time of the part . So, any one could help me out in figuring out what test i could do upon the assembly , in order to predict almost the right now of functioning years

Thanking you Regards Ashok Thiyagarajan SUNY - Binghamton

This message was posted Add this forum to your site! Click to learn more. the Electronics Forum @

reply »

#27243

Conductive Adhesives and flip chip | 12 February, 2004

Comments are: * We're amazed that you can thermocompression bond to epoxy. * Silver may be oxidizing during expoxy cure. * Klein Wassink talks about aging in THE BOOK [Soldering in Electronics: A Comprehensive Treatise on Soldering Technology for Surface Mounting and Through-Hole Techniques]

reply »

SMT Services - STI Electronics

Six Sigma Training