Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Novastar

Kratzman

#27179

Novastar | 10 February, 2004

Any one have anything to say about experiences with Novastar technologies? We are considering their reflow and wave machines. I am particulary wrried about support, they are a very small company.

reply »

#27180

Novastar | 10 February, 2004

Dear Kratzman,

We had one of their waves an 8FD and we had the worst time getting replacement pre-heaters, I would stay away, just my oppinion.

Zack

reply »

Ventrista

#27200

Novastar | 11 February, 2004

Bad experience here too. You can do better than this for wave and reflow

reply »

Eric

#27333

Novastar | 20 February, 2004

Have you tried Iemme or EPM? Iemme is Italian and have been building systems since 1973 and EPM is Swiss and has been building systems since 1969.

Either of these systems should work well for you.

Eric

reply »

teamcanada

#27334

Novastar | 20 February, 2004

Ive had a 4 zone reflow oven for the past 4 years. No problems or breakdowns. tech questions have been answered when asked

reply »

FPC* - Fluid Pressure Control - Dispensing Pump

 Reflow System