Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


HS180 AIR REQUIREMENT

JOHN GIBSON

#26766

HS180 AIR REQUIREMENT | 5 January, 2004

JUST BOUGHT SOME HS180 MACHINES - DOES ANYONE KNOW FOR SURE WHAT AIR REQUIREMENT IS SO I CAN SPEC. THE COMPRESSOR EQUIP.??

THANKS

This message was posted Add this forum to your site! Click to learn more. the Electronics Forum @

reply »

#26767

HS180 AIR REQUIREMENT | 5 January, 2004

8 bar, little consupmtion of air. Any compressor will do. No oil. But dry air. Ciao Jasper

reply »

#26776

HS180 AIR REQUIREMENT | 6 January, 2004

The manual is a bit more specific:

Connections and Energy Requirements Specification for the Compressed Air For the compressed air supplied for the automatic placement systems HS-180 (adhesive application station as well as placement station) and SP-120 the following specification applies. This specification is to be observed at all events to guarantee the proper functioning of the machine. Max. particle size by density (*) Pressure dewpoint Max. oil content Class 1 Class 4 Class 1 Particle size 0.1 micron Dewpoint + 3� C 0.1 mg/cbm Particle density 0.1 mg/cbm (*) based on ISO/DIS 8573-1 This specification is met by: x Oil-free compressors, e.g. Atlas Copco, model ZR4 x Compressed Air washer-driers x Series X microfilters, e.g. from Zander Placement station/adhesive station Turning station Input/output station 3 N PE, 50 Hz, 380/220 V, 1.5 kW CEE plug 16 A 3 N PE, 50 Hz, 380/220 V, 0.4 kW CEE plug 16 A 3 N PE, 50 Hz, 380/220 V, 0.2 kW CEE plug 16 A Electric Pneumatic 5.5 bar HS-180 a.adh.stat / 6.0 bar SP-120 200 standard litres/min. / HS-180 300 standard litres/min. / SP-120

reply »

PCB X-Ray Inspection

Essemtec Fox Compact Automatic Pick and Place