Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Looking for Wave-Exit conveyor belt(ESD, heat dissipative, flux)

Bill

#26620

Looking for Wave-Exit conveyor belt(ESD, heat dissipative, flux) | 16 December, 2003

We are in need of a replacement conveyor belt for an unload-end conveyor(post wave solder). The part number we had at one point (formerly PCT automation) was 65-4008-4 (Belt, Flat-W=23.75 L=171.70) green high temp conveyor belt.

Any help would be greatly appreciated. Bill

reply »

#26621

Looking for Wave-Exit conveyor belt(ESD, heat dissipative, flux) | 16 December, 2003

One used conveyor supplier is => Tech-Mation International 952 Alton Parkway Irondale, Al 35210 205-833-4277 (fax) 4377 Phil Higgins, Mathew Bennett (sales) Eric Ford (sales) tiusa@bellsouth.net http://www.tech-mation.com

We have no relationship, nor receive benefit from the company referenced in the above.

reply »

Bill

#26645

Looking for Wave-Exit conveyor belt(ESD, heat dissipative, flux) | 17 December, 2003

Thanks for the information, --We would like to replace the conveyor 'belt' rather than replace the whole conveyor.

Do you know of any sources for the belting material? (ESD, heat and chemical resistant)

Best Regards, Bill

reply »


FD

#26646

Looking for Wave-Exit conveyor belt(ESD, heat dissipative, flux) | 17 December, 2003

I was under the impression that PCT was bought out by one of their competitors, but I can't remember who. This was a couple years ago.

You may need to call a few manufacturers, or do some more research to see who bought them.

reply »

#26647

Looking for Wave-Exit conveyor belt(ESD, heat dissipative, flux) | 17 December, 2003

Really, they wouldn't sell you just the belt??? Wow.

Oh well, there was a SMTnet Thread on conveyor belts within the past 3 months. Search the fine Archives.

reply »

#26648

Looking for Wave-Exit conveyor belt(ESD, heat dissipative, flux) | 17 December, 2003

FlexLink purchased PCT Automation Systems Corp.

http://www.flexlink.com/

reply »

ex maintain leader

#26663

Looking for Wave-Exit conveyor belt(ESD, heat dissipative, flux) | 18 December, 2003

Nord- und S�damerika drucken���

USA Habasit Belting, Inc. (Affiliated Company) 305 Satellite Blvd P.O. Box 80507 USA-Suwanee, GA. 30024 Telefon: ++ 1-678-288 36 00 Fax: ++ 1-678-288 36 51 Videoconference: ++1- 678-546 34 59 E-Mail: hbi.habasit@us.habasit.com www.habasitusa.com Habasit Belting, Inc. (Affiliated Company) 1400 Clinton Street USA-Buffalo, New York 14206-2919 Telefon: ++ 1-716-824 84 84 Fax: ++ 1-716-827 03 75 E-Mail: hbi.habasit@us.habasit.com www.habasitusa.com Habasit ABT, Inc.(Affiliated Company) 150 Industrial Park Road USA-Middletown, CT 06457 Telefon: ++ 1-860-632 22 11 Fax: ++ 1-860-632 17 10 E-Mail: info@abthabasit.com www.habasitabt.com

reply »

#26678

Looking for Wave-Exit conveyor belt(ESD, heat dissipative, flux) | 19 December, 2003

Bill--Good morning. We have several decline conveyors w/ conductive black belt Plus cool down units w/ banks of (8) fans. I believe the belt widths are 18". Would that work? Everything is in Illinois. Thanks, Nick Haviland, Electronic Assembly Machinery Exchange, (262) 249-0808.

reply »

reflow oven profiler