Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Underfill Equipment

#25226

Underfill Equipment | 18 July, 2003

Hi all,

I am looking for some recommendations on Underfill Equipment. Such as vendors, pumps, material, etc...

We will be initially underfilling a 10mm x 10mm, 0.8mm pitch, 0.35mm ball uBGA on FR4 and going down in size and pitch from there. And yes we have to underfill.

Please no sales pitch, just helpful information is requested.

Thank you

James

reply »

#25231

Underfill Equipment | 18 July, 2003

Top Four Dispensing Equipment Companies:

Camalot www.cooksonee.com/about/about_camalot.html

Asymtek www.asymtek.com

GPD www.gpd-global.com

Creative Automation www.cacsystems.com

All above cos. have applications engineering personnel for underfill apps.

reply »


CAL

#25238

Underfill Equipment | 21 July, 2003

A machine for serious concideration MRSI 175uf Features: -High-throughput Underfill -Parallel Processing Conveyor Lanes -Linear Positive Displacement Pump -Total Process Thermal Control -Intuitive Graphical User Interface - Windows NT -Advanced Vision System -Resolution: +/- 0.0001" -Accuracy: +/- 0.001" (X-Y) 3 sigma; +/- 0.0005" (Z) 3 sigma -Repeatability: +/- 0.0005" (X-Y); +/- 0.0002" (Z) -Substrate Pre-heat: Contact with Vacuum Port 25� C. to 120� C., +/- 2� C. -Needle Tip Heat: 25� C. to 120� C., +/- 2� C. -Syringe: 5cc - 10cc - 30cc - 55cc

this is a serious machine...hopefully it is not over kill for what you need.

contact: MRSI Group Headquarters Main Contact: Dan Crowley 101 Billerica Ave., Bldg. 3 N. Billerica, MA 01862 USA Tel.: 978-667-9449 Fax: 978-667-6109 Web site: http://www.mrsigroup.com Email: sales@mrsigroup.com

Tell Dan Cal Driscoll sent you.

Best regards,

Cal Driscoll Communications Test Design, Inc. www.ctdi.com

reply »

Electronics Equipment Consignment

SMT Machines