Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


low humidity storage

#3320

low humidity storage | 11 August, 2000

I am looking for a storage system for short term storage of open BGA's or longer term de-humidifying or moisture removal.. Is there any low humidity chambers available???

greg

reply »

Bill

#3321

Re: low humidity storage | 14 August, 2000

You can get nitrogen storage cabinets for low humidity applications from Aerofeed Inc. in Chalfont, PA. See some of their models at www.bita.se.

Bill

reply »

#3322

Re: low humidity storage | 14 August, 2000

look back to August 3 for a thread on this

reply »

Chris C

#3323

Re: low humidity storage | 14 August, 2000

There are two similar products, Eureka and McDry dry box units and other nitrogen required units in the market. Both Eureka and McDry are not required Nitrogen, I'm seeing a cost saving there in the long run. I have several Eureka dry box in the facility and they're running fine. You can look at their Web sites at www.aiko-group.com for Eureka and www.seikausa.com for Mcdry.

Beside, you can search www.terrauni.com for the Inert Gas Dry desicator.

Hope this will help you.

Chris

reply »

ii-feed SMD Intelligent Feeder

PCB X-Ray Inspection