Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


How many company are there appling the Pihr (Pin in hole reflow) in SMT PROCESS..

kyung sam park

#3182

How many company are there appling the Pihr (Pin in hole reflow) in SMT PROCESS.. | 25 August, 2000

Hi. smtguys Would you let me know the name of company appling the pihr in smt process. As you know PIHR stands for pin in hole reflow.( pin in paste) I just want to know what company apply the PIHR in smt process. I expect the contents of the component type & company name & defect rate when you have applied pihr in smt process. because I have to prepare a seminar for pihr I will mention it on it thanks in advance.

reply »

Ramon I Garcia C

#3183

Re: How many company are there appling the Pihr (Pin in hole reflow) in SMT PROCESS.. | 31 August, 2000

I Kyung: I'm not sure if we are working with PIHR but we insert some pines in a PCB with a pin inserter machine, after that we run this pcb in a screen printer and put over its solder paste, and then run in a chip shooter and then IC placer and finally run the reflow, We haven't any problem with that, but we have to make sure that the height or profundity of the pins will be not longer that the stencil thickness because its could damaged the squeegees. my company is HEI,inc Mexico Division. if this that you're seeking you could write me for more information to ramigary@smtnet.com

reply »

Reflow Oven

reflow oven profiler