Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Part Data For fuji machines

JOHN

#3125

Part Data For fuji machines | 31 August, 2000

Hi guys I am looking for a more detailed information on creating part data and a more in depth understanding in this area

Regards John

reply »

lucky

#3126

Re: Part Data For fuji machines | 31 August, 2000

I do not understand what you are asking for????

reply »

Doug

#3127

Re: Part Data For fuji machines | 7 September, 2000

Which fuji machines do you have? The new manuals are pretty easy to follow, if you have them. SMD3 machines have the SMD3 Manual 7.1E and the BGA/Connector manuals available. Contact fuji training for more details. Otherwise, if you have certain questions about certain fields, use their website to post the message. There's a guy in the software department by the name of Al you could call and find out some info.

Good Luck

Doug

reply »

Murad Kurwa

#3128

Re: Part Data For fuji machines | 7 September, 2000

Best bet is to use Tecnomatics Unicam software. This is similar to Fujicam that I believe comes with Fujis. Initial part library comes with all the insdustry standard part classification. For new parts / odd parts you can add to the library.

Try www.tecnomatix-unicam.com. They sell software that handles this and their web-site has related documents to give you more info on managing part library. MK

reply »

PCB equipment

SMT Custom Nozzles