Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


GPD off line programming

#18698

GPD off line programming | 22 January, 2002

Hi All;

We are having problems finding software for off line programming of our GPD machine. We have talked to GPD and no luck.

Any leads out there?

Thanks Carl B.

reply »

#18703

GPD off line programming | 22 January, 2002

Start with the following: * Aegis ISC (Circuit CAM) * Mitron (GenRad) (CIMBridge) * CAE Technologies (C-Link)

reply »

#18707

GPD off line programming | 23 January, 2002

Thanks.

reply »

#18737

GPD off line programming | 28 January, 2002

Hello Carl,

Smart Sonic has introduced the Assembly Module for off line programming of assembly equipment such as GPD. You can see it on the Smart Sonic website: http://www.smartsonic.com

Click on the AOI/StencilScan and GlueScan link.

If you have any questions, feel free to contact me at: 1(800) 906-4407 or bill@smartsonic.com

Regards, Bill Schreiber

reply »

#18740

GPD off line programming | 28 January, 2002

The product mentioned by SmartSonic (stencil cleaner maker) is from ScanCAD International. See http://www.scancad.com

reply »

DOD

#18833

GPD off line programming | 8 February, 2002

Unicam has an interface that will program the dispense machine from GPD and the ouput has been validated by GPD.

reply »

Jeff

#19013

GPD off line programming | 28 February, 2002

CircuitCAM is a Partner with GPD and worked along with GPD to create the interface to support their dispensers.

reply »

Boundary Scan

SMT Replacement Nozzles