Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Chang Woo Cho

#16688

Flip chip placer | 20 February, 1998

I am looking for component placer that can handle not only smc but also flip chip C4. If there is any machine satisfying my request, please inform me. machine name , spec, and so on.

reply »

Jon Gruett

#16691

Re: Flip chip placer | 22 February, 1998

Chang, I recommend that you stop by the Siemens booth at the NEPCON West show and see the F4 and F5 machines. I think you will be pleaseantly surprised by what you see. Take some time and really research the next generation of machines that are here today. Good luck, JON | I am looking for component placer that can handle not only smc but also flip chip C4. | If there is any machine satisfying my request, please inform me. | machine name , spec, and so on.

reply »

Igmar

#16690

Re: Flip chip placer | 23 February, 1998

| I am looking for component placer that can handle not only smc but also flip chip C4. | If there is any machine satisfying my request, please inform me. | machine name , spec, and so on. You should definitely consider the "Best-in-Class" SIPLACE 80 F4. Follow the link below.

reply »

Tom Foley

#16689

Re: Flip chip placer | 9 March, 1998

| I am looking for component placer that can handle not only smc but also flip chip C4. | If there is any machine satisfying my request, please inform me. | machine name , spec, and so on.

Take a close look at the Philips ACM. The ACM is engineered to place fine pitch IC's and flip chips on the same machine. The ACM can be equipped with a standard camera for conventional components and a high resolution camera for flip chips, CSP's, COB. Accuracy is 25 micron, 4 sigma.

reply »

SMT Replacement Nozzles

reflow oven profiler