Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Robin Arnold

#16471

MSD in asembly and rework | 23 March, 1998

Do you know if there is an IPC standard or industry standard that addresses the proper process for handling MSD's in the production environment....? (rework etc.) Not the receiving area. Thanks so much, Robin Arnold PCB Development Harris Semiconductor

reply »

Steve Schrader

#16472

Re: MSD in asembly and rework | 24 March, 1998

| Do you know if there is an IPC standard or industry standard | that addresses the proper process for handling MSD's in the production environment....? (rework etc.) | Not the receiving area. | Thanks so much, | Robin Arnold | PCB Development | Harris Semiconductor Robin, Try these: J-STD-020 Moisture/Reflow Sensitivity Classification for Plastic Integrated Circuit Surface Mount Devices IPC-SM-786A Procedures for Characterizing and Handling of Moisture/Reflow Sensitive ICs Steve

reply »

pcb components X-ray inspection