Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Mike c

#16378

PCB Mask repair | 2 April, 1998

I am looking for a product to repair PCB mask (seal exposed copper) and fill Gouges in pcbs, any suggestions?

reply »

Justin Medernach

#16382

Re: PCB Mask repair | 2 April, 1998

| I am looking for a product to repair PCB mask (seal exposed copper) and fill Gouges in pcbs, any suggestions? Mike, They sell all sorts of reparation kits for this type of problem. Liquid mask can come in many forms. The easiest to use is probably the mask pens. Check out a Contact East catalogue. Look them up on the Web. They definitely have what you're looking for. Regards, Justin Medernach Flextronics Int'l PIC East

reply »

Scott Cook

#16380

Re: PCB Mask repair | 3 April, 1998

| I am looking for a product to repair PCB mask (seal exposed copper) and fill Gouges in pcbs, any suggestions? Why not use an electonic grade 5 minute epoxy? As long as it's inert, I'd do it. Scott

reply »

Use one of our UV cure conformal coatings

#16381

Re: PCB Mask repair | 4 April, 1998

| | | I am looking for a product to repair PCB mask (seal exposed copper) and fill Gouges in pcbs, any suggestions? | Why not use an electonic grade 5 minute epoxy? | As long as it's inert, I'd do it. | Scott

reply »

D.Lange

#16379

Re: PCB Mask repair | 15 April, 1998

| I am looking for a product to repair PCB mask (seal exposed copper) and fill Gouges in pcbs, any suggestions? Try this stuff no mix no mess comes in green and clear and maybe other colors. Dries readily at room temp and is in pen form for easy dispensing. 3300C-T CIRCUIT WORKS OVERCOAT PEN $9.95 EA CHEMTRONICS 3300G-C CIRCUIT WORKS OVERCOAT PEN $9.95 EA CHEMTRONICS

reply »

PCB Soldering Tools

Essemtec Spider SMT Fluid Dispenser