Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


No-Clean Solder Paste

Peter Guadagnin

#16342

No-Clean Solder Paste | 5 April, 1998

Question: Whatparameters are used to determine "good" Solder Paste? What reference documents could be reviewed to determine good (acceptable) quality?

reply »

Graham Naisbitt

#16343

Re: No-Clean Solder Paste | 5 April, 1998

Peter, Take a look at IPC-ANSI J-STD-001A and B, J-STD-004 and I think, 005/006 which cover solder paste (?) I think. Whatever, they do reference one another. | Question: Whatparameters are used to determine "good" Solder Paste? What reference documents could be reviewed to determine good (acceptable) quality?

reply »

Justin Medernach

#16344

Re: No-Clean Solder Paste | 6 April, 1998

| Peter, | Take a look at IPC-ANSI J-STD-001A and B, J-STD-004 and I think, 005/006 which cover solder paste (?) I think. | Whatever, they do reference one another. | | Question: Whatparameters are used to determine "good" Solder Paste? What reference documents could be reviewed to determine good (acceptable) quality? Peter, IPC-ANSI J-STD-005 is the document you want. It explains a lot about paste and also gives some really good paste qualification tests. Regards, Justin Medernach Flextronics Int'l PIC East

reply »

Essemtec Spider SMT Fluid Dispenser

Reflow Ovens thermal process improvement