Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Ben Salisbury

#16259

Fuji CPII Height limitations | 10 April, 1998

Has anyone Ran parts on the CPII taller than 4mm? If so, what adjustments were made to the machines to accomodate such a part?

reply »

Doug Carter

#16261

Re: Fuji CPII Height limitations | 16 April, 1998

| Has anyone Ran parts on the CPII taller than 4mm? | If so, what adjustments were made to the machines to accomodate such a part?

reply »

Doug Carter

#16260

Re: Fuji CPII Height limitations | 16 April, 1998

| Has anyone Ran parts on the CPII taller than 4mm? | If so, what adjustments were made to the machines to accomodate such a part? The cp 3 we own can not place 4 or 5 mm parts in the middle of the program. They have to be placed at the end of the program. The table will drop and these parts are added at the end. Parts taller than 4 or 5 mm will be knocked off by the d-axis table platform. Hope this can answer you question.

reply »

SMT Custom Nozzles

ii-feed SMD Intelligent Feeder