Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


FUjJI IP-3 / MTU4 proper measurement tricks

Phillipf Hunter

#15998

FUjJI IP-3 / MTU4 proper measurement tricks | 4 May, 1998

Okay, Fuji MTU4 experts...I need a precise way to determin the X-origin and Y-origin of the tray plates. The center of the S-nozzle referenced to the plate corner is very difficult to EXACTLY measure. I need accuracy to pick small QFP28's - otherwise I have step and repeat problems in the tray matrix. Any help will be apreciated. phillip.hunter@lwg.com

reply »

Timm Rose

#15999

Re: FUjJI IP-3 / MTU4 proper measurement tricks | 6 May, 1998

FUJI has a calibration tool for measuring the tray pick possition for the IP-3 machine. The part number is QPJ-1061

reply »

PCB X-Ray Inspection

Boundary Scan