Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Radial Components W/ Standoffs

Thomas Nisbet

#15981

Radial Components W/ Standoffs | 6 May, 1998

We want to insert LED's on .100 center's with a UIC Rad 2. The LED must have plastic standoff on the leads before they are inserted. Are there any tape & reel machines that will put the standoff on the LED and then put the component on tape & Reel. Are the any component distributors that can help?

reply »

Don Spicer

#15982

Re: Radial Components W/ Standoffs | 1 June, 1998

| We want to insert LED's on .100 center's | with a UIC Rad 2. The LED must have plastic | standoff on the leads before they are inserted. | Are there any tape & reel machines that will | put the standoff on the LED and then put the component | on tape & Reel. | Are the any component distributors that can help?

reply »

Don Spicer

#15983

Re: Radial Components W/ Standoffs | 1 June, 1998

Contact George Moronus at Electro Prep. 408-739-6015

reply »

vacuum tweezers - manual pcb assembly

Used PCBA Equipment