Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Michael

#15388

SimmBlaster | 17 June, 1998

Does anyone know how many 8mm feeder positions the Panasonic MV2F SimmBlaster can hold. I read an article saying 30/30 split carriage, and another article saying 75/75. This info. was taken from "U.S. Tech", and the January edition of Circuits Assembly. If anyone is using this machine, any feedback would be appreciated. Pros/Cons. Thanks in advance. Mike

reply »

Jim Gurley

#15389

Re: SimmBlaster | 17 June, 1998

| Does anyone know how many 8mm feeder positions the Panasonic MV2F SimmBlaster can hold. I read an article saying 30/30 split carriage, and another article saying 75/75. This info. was taken from "U.S. Tech", and the January edition of Circuits Assembly. If anyone is using this machine, any feedback would be appreciated. Pros/Cons. Thanks in advance. :The answer is the 30/30 can accomodate 60 single position 8 mm feeders or 60 double position 8mm feeders for a total of 120 slots. The 75/75 is a separate version of the MV2F with similar capabilities. Your choice at time of machine specification, not retrofittable. Feel free to call Tony at 770-338-6942 at Panasonic anytime.

reply »

SMT Machines china

Used PCB Equipment - AdoptSMT