Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


BGA inspection guideline

Rin Or

#15219

BGA inspection guideline | 26 June, 1998

I am very interesting of getting information about the criteria inspection of BGA. Example, what are percentage allowance for void, solder joint volume etc.. Any information feed back will be greatly appreciated.My factory just install the Nicolet NXR-1400M model. Thanks, Rin

reply »

Martin Kelly

#15221

Re: BGA inspection guideline | 7 July, 1998

Hi just to let you know, in case you don't, but an x-ray machine is needed too check the solder balls, once they've been placed. See you later, | | I am very interesting of getting information about the criteria inspection of BGA. Example, what are percentage allowance for void, solder joint volume etc.. Any information feed back will be greatly appreciated.My factory just install the Nicolet NXR-1400M model. | Thanks, | Rin

reply »

Bob Willis

#15220

Re: BGA inspection guideline | 10 July, 1998

There is a FREE yes Free inspection standard on my web site you can download. There is also information on my CD ROM, posters and video for BGA Inspection http://www.bobwillis.co.uk | | I am very interesting of getting information about the criteria inspection of BGA. Example, what are percentage allowance for void, solder joint volume etc.. Any information feed back will be greatly appreciated.My factory just install the Nicolet NXR-1400M model. | Thanks, | Rin

reply »

PCB X-Ray Inspection System

PCB X-Ray Inspection