Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


FUJI 641

James Vaughn

#15062

FUJI 641 | 13 July, 1998

What frame is used in the FUJI 641 printer? What offset dimension is used from the leading edge of the frame? Thanks for any help on this subject.

reply »

Steve

#15064

Re: FUJI 641 | 15 July, 1998

| What frame is used in the FUJI 641 printer? What offset dimension is used from the leading edge of the frame? Thanks for any help on this subject. HI JIM

reply »

Eric

#15065

Re: FUJI 641 | 15 July, 1998

| | What frame is used in the FUJI 641 printer? What offset dimension is used from the leading edge of the frame? Thanks for any help on this subject. | HI JIM Hi Steve and Jim!

reply »

Timm

#15063

Re: FUJI 641 | 16 July, 1998

The frame size is 650mm long X 680mm wide X 28mm high. e-mail your FAX number to me and I will send you the stencil layout pattern.

reply »

SMT Custom Nozzles

 Reflow System