Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Fuji QP

Jim Smith

#15034

Fuji QP | 14 July, 1998

Hi, I'm an SMT tech in a major OEM in Scotland and we have just purchased two Fuji QP's. Does anybody out there have a list of do's and don'ts especialy regarding preventative maintenance and common faults.

reply »

Ben Salisbury

#15037

Re: Fuji QP | 14 July, 1998

| | Hi, | I'm an SMT tech in a major OEM in Scotland and we have just purchased two Fuji QP's. Does anybody out there have a list of do's and don'ts especialy regarding preventative maintenance and common faults. Jim- I Haven't used the QP's yet...however FUJI Does have a complete supply of machine maintenance manuals. try getting ahold of them and they should be able to set you up. With all the fuji Equipment I've used though, the PM's for the different machines varies very little. i.e. Keep all filters clean, Clean and lube Ball Screws and LM shafts, check belts for wear.... and so on. After a few weeks of operation and observance of the machine, you can almost completely deduce, what PM's need to be done. Hope this helps any -Ben

reply »

Process Engineer

#15035

Re: Fuji QP | 15 July, 1998

| | Hi, | I'm an SMT tech in a major OEM in Scotland and we have just purchased two Fuji QP's. Does anybody out there have a list of do's and don'ts especialy regarding preventative maintenance and common faults. Which QP machine? The QP242 or the QP132??

reply »

Jim Smith

#15036

Re: Fuji QP | 15 July, 1998

To process eng. , It's the Fuji FQP132E....

| | | | Hi, | | I'm an SMT tech in a major OEM in Scotland and we have just purchased two Fuji QP's. Does anybody out there have a list of do's and don'ts especialy regarding preventative maintenance and common faults. | Which QP machine? The QP242 or the QP132??

reply »

SMT Custom Nozzles

McDry Ultra-Low Humidity Storage Cabinets