Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Stoney Tsai

#15006

SMT soldering expert system | 15 July, 1998

I have been building one sophisticated SMT soldering expert system (KBS), through my 8-YEARs SMT experience. As I know, in the marketplace only published some SMT raw material selection Expert System. The system needs more technical information about manufacturability and individual machine setting criterions. If you are interesting to this subject, welcomed to provide some ideas to me to extend the functionality. Mainly, it would play a role of advisor essentially for SMT assembly. Thx in advance

reply »

Stoney Tsai

#15007

Re: SMT soldering expert system | 25 July, 1998

| I have been building one sophisticated SMT soldering expert system (KBS), through my 8-YEARs SMT experience. As I know, in the marketplace only published some SMT raw material selection Expert System. | The system needs more technical information about manufacturability and individual machine setting criterions. | If you are interesting to this subject, welcomed to provide some ideas to me to extend the functionality. Mainly, it would play a role of advisor essentially for SMT assembly. | Thx in advance ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Hi, friends, There is only one response so far for this subject. I tried to define solder joint relibility with somewhat formula or ranking criterias. such as fillet height, toe, solder defect... etc, and finally output a score. But, I am afraid of this score can not represent solderability well. your advises are welcomed.

reply »

Reflow Oven