Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Stoney Tsai

#14943

BGA rework station and x-ray inspector | 20 July, 1998

We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. Thx for any information Best Regards, Stoney Tsai

reply »

wayne

#14949

Re: BGA rework station and x-ray inspector | 21 July, 1998

| | We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. | Thx for any information | Best Regards, | Stoney Tsai Stoney: Take a look at the Austin American Technology BGA rework equipment. Entry level equipment, but worth taking a close look at. Also manufacture the Mega II cleaning system that might be of interest to you.

Wayne

reply »

Frank Silva

#14948

Re: BGA rework station and x-ray inspector | 22 July, 1998

| | We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. | Thx for any information | Best Regards, | Stoney Tsai Stoney, Check out Nicolet Imaging Systems for x-ray inspection equipment and SRT for BGA rework equipment.

reply »

bill

#14947

Re: BGA rework station and x-ray inspector | 22 July, 1998

| | We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. | Thx for any information | Best Regards, | Stoney Tsai If you are doing any reballing of the part, try contacting Hepco in Sunnyvale california. They have a slick, inexpensive system. As for placement anf reflow, APE and Pace have proven to work very well and quite inexpensive.

reply »

Steve Zweig

#14950

Re: BGA rework station and x-ray inspector | 31 July, 1998

Check out www.glenbrooktech.com for x-ray systems

reply »

X-man

#14946

Re: BGA rework station and x-ray inspector | 11 August, 1998

| | We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. | Thx for any information | Best Regards, | Stoney Tsai Stoney, Probably the best rework system out there for removing and replacing BGA's is the Conceptronic Freedom machine. We have had great success with it and then we use the Genbrook x-ray machine to view the voids. We have had great fortune with it as well. Check them both out on the web and you will see they are what they claim. The best systems on the market. Good luck!!! X

reply »

Clyde F.

#14945

Re: BGA rework station and x-ray inspector | 15 August, 1998

| | We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. | Thx for any information | Best Regards, | Stoney Tsai

reply »

Clyde F.

#14944

Re: BGA rework station and x-ray inspector | 15 August, 1998

| | We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. | Thx for any information | Best Regards, | Stoney Tsai PACE just came out with a new system called the TF-700. It allows you to program 4-zone thermal profiles and is much less expensive than SRT, Austin American, Conceptronic or OK Industries.

reply »

PCB X-Ray Inspection System

Solder Paste Inspection