Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Gage R&R on solder paste inspection

Steve Arneson

#14698

Gage R&R on solder paste inspection | 13 August, 1998

I am looking for information on any Gage R&R studies for the CyberOptics LSM solder paste inspection system. If you are a current user of one of these systems, are you finding any problems with the repeatability due to operator variation? What issues are you seeing as the result. Any input is greatly appreciated. Steve ASC Int'l

reply »

Mike Cox

#14699

Re: Gage R&R on solder paste inspection | 13 August, 1998

| I am looking for information on any Gage R&R studies for the CyberOptics LSM solder paste inspection system. If you are a current user of one of these systems, are you finding any problems with the repeatability due to operator variation? What issues are you seeing as the result. | Any input is greatly appreciated. | Steve Hi Steve At a previous employer Some of my cronies performed a gage R&R on the cyberoptics. Although I was not directly involved here are some of the rumblings I heard. 1) Big variance from operator to operator to the point the spec range was completely used up. 2) A software and hardware package was purchased that automatically calculated the Solder height and updated SPC charts. Contact Cyberoptics they should be able to supply the contact information for the software company. Mike C

reply »

PCB X-Ray Inspection

Solder Paste Inspection