Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


S. L. Vito

#14582

SIEMENS + PANASONIC | 24 August, 1998

I am studing the possibility of a line with one Siemens SIPLACE 80 F and a PANASONIC machine (cam be a MSH-G3 or MVIIF (m) or MSHII (m)). I have several reasons to do this, but i would like to know more details about operating this kind of line. Can this line have a good perform? what kind of dificults are to be expected? Is there a easy way to balancing this line? Thanks For attencion. S. L. Vito

reply »

Justin Medernach

#14584

Re: SIEMENS + PANASONIC | 25 August, 1998

| I am studing the possibility of a line with one Siemens SIPLACE 80 F and a PANASONIC machine (cam be a MSH-G3 or MVIIF (m) or MSHII (m)). | I have several reasons to do this, but i would like to know more details about operating this kind of line. | Can this line have a good perform? what kind of dificults are to be expected? Is there a easy way to balancing this line? | Thanks For attencion. | S. L. Vito Sr. Vito, Talk to the folks at Unicam. They make line management / control software for both equipment platforms. Perhaps they can come up with something. If not, it sounds someone at your facilities has a lot of stop watch and Pythagorean theorem work ahead of them. Regards, Justin Medernach

reply »

Lance Smalley

#14583

Re: SIEMENS + PANASONIC | 25 August, 1998

Panasonic Factory Automation now has (or soon will) software to balance with other companies' machines. I don't know how it works yet, but is an option Lance | I am studing the possibility of a line with one Siemens SIPLACE 80 F and a PANASONIC machine (cam be a MSH-G3 or MVIIF (m) or MSHII (m)). | I have several reasons to do this, but i would like to know more details about operating this kind of line. | Can this line have a good perform? what kind of dificults are to be expected? Is there a easy way to balancing this line? | Thanks For attencion. | S. L. Vito

reply »

Bill West

#14585

Re: SIEMENS + PANASONIC | 25 August, 1998

Unicam can be a powerful tool, but you want to find out who else may be using it on the same Panasonic machine. I do know of soembody that is using it with Siemens if you are interested. I am sure you have your reasons, but I am very curious why you are mixing this equipment. What generation of Siplace do you have (S15, S20, F, ?). Bill. | | I am studing the possibility of a line with one Siemens SIPLACE 80 F and a PANASONIC machine (cam be a MSH-G3 or MVIIF (m) or MSHII (m)). | | I have several reasons to do this, but i would like to know more details about operating this kind of line. | | Can this line have a good perform? what kind of dificults are to be expected? Is there a easy way to balancing this line? | | Thanks For attencion. | | S. L. Vito | Sr. Vito, | Talk to the folks at Unicam. They make line management / control software for both equipment platforms. Perhaps they can come up with something. If not, it sounds someone at your facilities has a lot of stop watch and Pythagorean theorem work ahead of them. | Regards, | Justin Medernach

reply »

Rob Reilly

#14586

Re: SIEMENS + PANASONIC | 2 September, 1998

| Unicam can be a powerful tool, but you want to find out who else may be using it on the same Panasonic machine. I do know of soembody that is using it with Siemens if you are interested. | I am sure you have your reasons, but I am very curious why you are mixing this equipment. What generation of Siplace do you have (S15, S20, F, ?). | Bill. | | | I am studing the possibility of a line with one Siemens SIPLACE 80 F and a PANASONIC machine (cam be a MSH-G3 or MVIIF (m) or MSHII (m)). | | | I have several reasons to do this, but i would like to know more details about operating this kind of line. | | | Can this line have a good perform? what kind of dificults are to be expected? Is there a easy way to balancing this line? | | | Thanks For attencion. | | | S. L. Vito | | Sr. Vito, | | Talk to the folks at Unicam. They make line management / control software for both equipment platforms. Perhaps they can come up with something. If not, it sounds someone at your facilities has a lot of stop watch and Pythagorean theorem work ahead of them. | | Regards, | | Justin Medernach If your looking for something that can give you the best balance and optimization for hetrogeneous and homogeneous lines you should look into Tecnomatix. Regards, Rob

reply »

Bill West

#14587

Re: SIEMENS + PANASONIC | 4 September, 1998

| | | Unicam can be a powerful tool, but you want to find out who else may be using it on the same Panasonic machine. I do know of soembody that is using it with Siemens if you are interested. | | I am sure you have your reasons, but I am very curious why you are mixing this equipment. What generation of Siplace do you have (S15, S20, F, ?). | | Bill. | | | | I am studing the possibility of a line with one Siemens SIPLACE 80 F and a PANASONIC machine (cam be a MSH-G3 or MVIIF (m) or MSHII (m)). | | | | I have several reasons to do this, but i would like to know more details about operating this kind of line. | | | | Can this line have a good perform? what kind of dificults are to be expected? Is there a easy way to balancing this line? | | | | Thanks For attencion. | | | | S. L. Vito | | | Sr. Vito, | | | Talk to the folks at Unicam. They make line management / control software for both equipment platforms. Perhaps they can come up with something. If not, it sounds someone at your facilities has a lot of stop watch and Pythagorean theorem work ahead of them. | | | Regards, | | | Justin Medernach | If your looking for something that can give you the best balance and optimization for hetrogeneous and homogeneous lines you should look into Tecnomatix. | Regards, | Rob Who is Tecnomatix, and how do you contact them? Bill.

reply »

SMT Custom Nozzles

SP700avi inline smt screen printer