Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


A note of thanks

Ben Salisbury

#13914

A note of thanks | 7 October, 1998

Well...the last machine has just been loaded onto the truck and is heading down to our plant in Mexico, in this last year or so, I have recieved aid and guidance from many of you on this forum, and am very greatfull. My new job is going to be possibly as far away from SMT as a person could possibly get, So my involvment in the forum is going to lessen a bit. But there are still plans to stay as involved as possible in the industry, and am always willing to offer aid and guidance to whomever may need it.

I also like to give special thanks to Cunli and everyone who makes this forum possible, they've provided a wonderful service to the SMT community.

-Ben Salisbury thanks

reply »

Cunli Jia @ SMTnet

#13915

Re: A note of thanks | 7 October, 1998

Ben,

All of us at SMTnet want to thank you for your help to us and our fellow SMTneters. With 59 postings since December 1997, you have been one of the top 10 contributors. We wish you the best on your new job and thank you for promising to visit us again.

Cunli

reply »

Dave F

#13916

Re: A note of thanks | 7 October, 1998

| Well...the last machine has just been loaded onto the truck and is heading down to our plant in Mexico, in this last year or so, I have recieved aid and guidance from many of you on this forum, and am very greatfull. My new job is going to be possibly as far away from SMT as a person could possibly get, So my involvment in the forum is going to lessen a bit. But there are still plans to stay as involved as possible in the industry, and am always willing to offer aid and guidance to whomever may need it. | | I also like to give special thanks to Cunli and everyone who makes this forum possible, they've provided a wonderful service to the SMT community. | | -Ben Salisbury | thanks | Ben: Congrats on a new "adventure." Hey where are you going to work??? Give us the company URL. We can email your new boss recommendations. Wouldn't that be great??? Dave F

reply »

Wayne Bracy

#13917

Re: A note of thanks | 8 October, 1998

| Well...the last machine has just been loaded onto the truck and is heading down to our plant in Mexico, in this last year or so, I have recieved aid and guidance from many of you on this forum, and am very greatfull. My new job is going to be possibly as far away from SMT as a person could possibly get, So my involvment in the forum is going to lessen a bit. But there are still plans to stay as involved as possible in the industry, and am always willing to offer aid and guidance to whomever may need it. | | I also like to give special thanks to Cunli and everyone who makes this forum possible, they've provided a wonderful service to the SMT community. | | -Ben Salisbury | thanks |

Ben:

Darn..............I go along with Dave F Let us know we will sure tell-um. Don't be a stranger you will be missed... Thanks for all the nice comments!

Wayne

reply »

Earl Moon

#13918

Re: A note of thanks | 8 October, 1998

| Well...the last machine has just been loaded onto the truck and is heading down to our plant in Mexico, in this last year or so, I have recieved aid and guidance from many of you on this forum, and am very greatfull. My new job is going to be possibly as far away from SMT as a person could possibly get, So my involvment in the forum is going to lessen a bit. But there are still plans to stay as involved as possible in the industry, and am always willing to offer aid and guidance to whomever may need it. | Ben,

Thank you. Go kick butt. Hope to see you in Spokane.

Earl Moon | I also like to give special thanks to Cunli and everyone who makes this forum possible, they've provided a wonderful service to the SMT community. | | -Ben Salisbury | thanks |

reply »

Ben Salisbury

#13919

Re: A note of thanks | 8 October, 1998

| Ben: Congrats on a new "adventure." Hey where are you going to work??? Give us the company URL. We can email your new boss recommendations. Wouldn't that be great??? Dave F |

Same company....just a different position, Got a promotion, I've been hired into our Technical Designer 3 position...Get to draw up all the new labels for our companies products. :) I don't worry....I don't plan on being a stranger.

-Ben

reply »

Chrys

#13920

Re: A note of thanks | 9 October, 1998

| Well...the last machine has just been loaded onto the truck and is heading down to our plant in Mexico, in this last year or so, I have recieved aid and guidance from many of you on this forum, and am very greatfull. My new job is going to be possibly as far away from SMT as a person could possibly get, So my involvment in the forum is going to lessen a bit. But there are still plans to stay as involved as possible in the industry, and am always willing to offer aid and guidance to whomever may need it. | | I also like to give special thanks to Cunli and everyone who makes this forum possible, they've provided a wonderful service to the SMT community. | | -Ben Salisbury | thanks | Ben,

Good luck in your new position. Your inputs onthe forum will be missed.

Chrys

reply »

Kallol Chakraborty

#13921

Re: A note of thanks | 9 October, 1998

| Well...the last machine has just been loaded onto the truck and is heading down to our plant in Mexico, in this last year or so, I have recieved aid and guidance from many of you on this forum, and am very greatfull. My new job is going to be possibly as far away from SMT as a person could possibly get, So my involvment in the forum is going to lessen a bit. But there are still plans to stay as involved as possible in the industry, and am always willing to offer aid and guidance to whomever may need it. | | I also like to give special thanks to Cunli and everyone who makes this forum possible, they've provided a wonderful service to the SMT community. | | -Ben Salisbury | thanks | Hi Ben

Thanks for helping me / us several different time with your experience. Good luck with your new endeavour.

Regards Kc.

reply »

Plasma prior Conformal Coating

Reflow Ovens thermal process improvement