Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


bernie

#13624

FCM programming software | 2 November, 1998

What programming software is available for the Philips FCM? I currently use the Philips PPS software, but the user interface is less than desirable. Surely there is something better.

reply »

Chris Young

#13625

Re: FCM programming software | 3 November, 1998

| What programming software is available for the Philips FCM? I currently use the Philips PPS software, but the user interface is less than desirable. Surely there is something better. |

Bernie,

CIMBridge'97 from GR Software (Mitron-Genrad) has a very good package. Unicam and Technomatix (Exaline) also support the FCM platform.

If you would like additional information, please contact me. Phone: 770-751-4677

Regards,

Chris

reply »

jboudia

#13626

Re: FCM programming software | 3 November, 1998

| | What programming software is available for the Philips FCM? I currently use the Philips PPS software, but the user interface is less than desirable. Surely there is something better. | | | | Bernie, | | CIMBridge'97 from GR Software (Mitron-Genrad) has a very good package. Unicam and Technomatix (Exaline) also support the FCM platform. | | If you would like additional information, please contact me. Phone: 770-751-4677 | | | Regards, | | Chris | I understand there may be some problem with the cimbridge software in outputting pps actionspecs, True or False, is any other software available?

reply »

reflow oven profiler

Manufacturing Software