Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Interface software for Cadence to QSV-1 and Point5588

Gang

#13409

Interface software for Cadence to QSV-1 and Point5588 | 24 November, 1998

I got Quad QSV-1 assemblier and Tescon Point5588 fly probe tester this year. Any body know what kind software suit best for transfer Cadence Alegro 13 CAD data into those QSV-1 and Point5588 machine ? There are some software packages like UNICAM and FABMASTER have much more features than I needed and are expensive. Do I have other choice ?

Thanks.

reply »

Jim Mitchell

#13410

Quad usually does not need conversion software | 25 November, 1998

Gang - Thanks for your recent kind comments recently on the QSV-1 machine. As you know, QSoft can import a variety of Windows formats including tab and space delimitted files. It may be that this Cadence software does not export ASCII data. In any event, send me a copy of a sample file and I will be happy to look at it for you and post the proper response on SMT Net.

Take Thursday off and celebrate Thanksgiving!

reply »

Dave F

#13411

Re: Interface software for Cadence to QSV-1 and Point5588 | 30 November, 1998

| I got Quad QSV-1 assemblier and Tescon Point5588 fly probe tester this year. Any body know what kind software suit best for transfer Cadence Alegro 13 CAD data into those QSV-1 and Point5588 machine ? | There are some software packages like UNICAM and FABMASTER have much more features than I needed and are expensive. Do I have other choice ? | | Thanks. | Gang: I'm not sure about in-place capabilities, but Unicam a some degree and Fabmaster to a large degree don't appear to be real interested in talking to small dogs. Good value in CAD to CAM is:

Aegis ISC (Circuit CAM) 215.643.3162 talk to Jason Spera

Good luck

Dave F

reply »

Manufacturing Software

reflow oven profiler