Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


ZHIGANG LU

#13359

CP FEEDER TAKE UP REELS | 1 December, 1998

Our CP feeder take up reels often break,The glue in tabs are a pain and replacement is expensive.Any solution?

reply »

David Lombard

#13360

Re: CP FEEDER TAKE UP REELS | 1 December, 1998

| Our CP feeder take up reels often break,The glue in tabs | are a pain and replacement is expensive.Any solution? | There is a company that makes universal CP3, CP4, & CP6 take up reels at a good price. They will send you a free sample to try! Call SMTParts, USA @ 800-317-1886 or Email @ smtparts@yahoo.com

reply »

Wayne Bracy

#13361

Re: CP FEEDER TAKE UP REELS | 2 December, 1998

| Our CP feeder take up reels often break,The glue in tabs | are a pain and replacement is expensive.Any solution? | You might want to call Hover-Davis (716)352-9590 for information on their replacement parts and new feeders.

Wayne

reply »

fuji god

#13362

Re: CP FEEDER TAKE UP REELS | 2 December, 1998

| Our CP feeder take up reels often break,The glue in tabs | are a pain and replacement is expensive.Any solution? |

Be sure that you are using the correct take up wheel with the correct feeder. There are two distinct types of take up wheels, ones with the plastic glue in tabs and ones without. If you use the take up wheel with the glue in tabs on a feeder intended for the non-glue in tabs, the tabs will break in a hurry. The locking tabs on the feeders intended for the non-glue in take up wheels are thicker and flex the glue in tabs beyond their breaking point.

reply »

SMT Custom Nozzles

SMT Machines china