Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


FUJI IP3

USER

#13291

FUJI IP3 | 12 December, 1998

My Fuji IP3 keeps getting the Check Sensor Error. What is the problem?

reply »

David Lombard

#13292

Re: FUJI IP3 | 12 December, 1998

| My Fuji IP3 keeps getting the Check Sensor Error. | What is the problem? | This problem is caused by either of two things. First the vacuum chuck get dirty and needs to be cleaned "PM". If the problem is persistant the vacuum chick has worn down and is not long enough to reach the sensor. SMT Parts, USA sell Fuji IP3 vacuum chucks that last 3 time longer then OEM and have a design such that they reduce the occurance of the "Check Chuck Sensor Error". Contact them at: 800-317-1886 or email @ smtparts@yahoo.com Good luck!

reply »

David Lombard

#13293

Re: FUJI IP3 | 12 December, 1998

| My Fuji IP3 keeps getting the Check Sensor Error. | What is the problem?

| This problem is caused by either of two things. First the vacuum chuck get dirty and needs to be cleaned "PM". If the problem is persistant the vacuum chick has worn down and is not long enough to reach the sensor. SMT Parts, USA sell Fuji IP3 vacuum chucks that last 3 time longer then OEM and have a design such that they reduce the occurance of the "Check Chuck Sensor Error". Contact them at: 800-317-1886 or email @ smtparts@yahoo.com Good luck!

reply »

SMT Custom Nozzles

BGA Rework Services