Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Mike

#13250

HSP | 17 December, 1998

What is the CPH for Universal/Sanyo chip shooter? Spec. needed only. Thanks

reply »

Hallj

#13251

Re: HSP | 17 December, 1998

| What is the CPH for Universal/Sanyo chip shooter? Spec. needed only. Thanks | Are you asking about the chip jet or flex jet made by universal>

reply »

Dave F

#13252

Re: HSP | 17 December, 1998

| What is the CPH for Universal/Sanyo chip shooter? Spec. needed only. Thanks | Mike: Universal´┐Żs High Speed Placement (HSP) machines are booked at: 4791 - 30k cph 4796 - 36k cph

reply »

Dave Kalen

#13253

Re: HSP | 17 December, 1998

| What is the CPH for Universal/Sanyo chip shooter? Spec. needed only. Thanks | Mike, just like the rates that Dave F said, the tact times of the newer Sanyo/UIC machines is .1 or 36000cph. Because of the Direct Drive head, we have little derate so, your real world placement times will be closer to the 36K.

reply »

Dave F

#13254

Re: HSP No!!! ChipJet Yes!!! | 18 December, 1998

| | What is the CPH for Universal/Sanyo chip shooter? Spec. needed only. Thanks | | | Are you asking about the chip jet or flex jet made by universal> | Hallj: I believe a Universal "chipjet" is a bulk feeder that mounts directly on a GSM placement head. Check the link below. TTYL Dave F

reply »

ii-feed SMT Intelligent Feeder

Reflow Oven