Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Chris Grendler

#13208

E-Fab Stencils | 24 December, 1998

Any one know a good stencil vendor who can produce stencils below .002" foil with appetures at .004" on .008" pitch? AMTX use to be my vendor but they are closed down.

Thanks,

Chris Grendler

reply »

Dave F

#13209

Re: E-Fab Stencils | 26 December, 1998

| Any one know a good stencil vendor who can produce stencils below .002" foil with appetures at .004" on .008" pitch? AMTX use to be my vendor but they are closed down. | | Thanks, | | Chris Grendler | Chris: One source of e-formed stencils remains. AMTX tried their best to put them out of business, they still are out there making stencils and AMTX isn't making anything. Good luck. Dave F

Chepaume Industries 6001 Airport Rd Oriskany, NY 13424 315-768-7001 or at 315-768-7002 Fax 0270 Melissa chepaume@borg.com www.ieec.binghamton.edu/ieec/ieecpche.html

reply »

Chris Grendler

#13210

Re: E-Fab Stencils | 28 December, 1998

| | Any one know a good stencil vendor who can produce stencils below .002" foil with appetures at .004" on .008" pitch? AMTX use to be my vendor but they are closed down. | | | | Thanks, | | | | Chris Grendler | | | Chris: One source of e-formed stencils remains. AMTX tried their best to put them out of business, they still are out there making stencils and AMTX isn't making anything. Good luck. Dave F | | Chepaume Industries 6001 Airport Rd Oriskany, NY 13424 315-768-7001 or at 315-768-7002 Fax 0270 Melissa chepaume@borg.com www.ieec.binghamton.edu/ieec/ieecpche.html | Dave,

Thanks for the info. Got several E_mails about stencils from others as well. I thank them as well. Spoke to Melissa today and will get quotes from her. Upon speaking to Melissa, found out that Chepaume has the rights to make Techfoil stencils (the foil only stencil that fits into the frame). Have one of these Techfoil frames which I received from my Germany plant. Never knew of a US vendor who had the rights to make Techfoil. Always knew Tecan, Weymouth England did. Anyway thanks for the info.

Chris

reply »

PCB Soldering Tools

Used SMT