Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


PCB Repair Training

Tony Yang

#13099

PCB Repair Training | 5 January, 1999

I am looking for some training resources on repairing PCB pads, traces, and other damaged PCB in San Jose area. Does IPC provide this type of training class?

reply »

Earl Moon

#13100

Re: PCB Repair Training | 5 January, 1999

| I am looking for some training resources on repairing PCB pads, traces, and other damaged PCB in San Jose area. Does IPC provide this type of training class? | IPC provides the most recent, and their best, requirements for repair, modification, and rework. IPC 7711 and 7721 are the requirements and are very clear if not always capable of being accomplished.

Earl Moon

reply »

Cunli Jia @ SMTnet

#13101

Re: PCB Repair Training | 5 January, 1999

Tony,

Please check out PRECISION PCB SERVICES, INC. in Santa Clara, CA. They specialize in PCB repair including training. Call (408) 654-0773 and ask for Dennis, or e-mail him at ppcbs@aol.com. Their web site is listed below too. Good luck.

Cunli

| I am looking for some training resources on repairing PCB pads, traces, and other damaged PCB in San Jose area. Does IPC provide this type of training class? |

reply »

Tom B

#13102

Re: PCB Repair Training | 6 January, 1999

| I am looking for some training resources on repairing PCB pads, traces, and other damaged PCB in San Jose area. Does IPC provide this type of training class? |

Tony,

Pace Inc., the makers of Pace soldering eqipment also provide some training, if I am not mistaken alot of Pace procedures are used by the IPC, according to Pace.

Also check out their web page www.paceusa.com, they list produres on repair and replace of PCB and components.

Tom B.

reply »

Tom B

#13103

Re: PCB Repair Training | 8 January, 1999

Check out www.circuitnet.com

| I am looking for some training resources on repairing PCB pads, traces, and other damaged PCB in San Jose area. Does IPC provide this type of training class? |

reply »

PCB Soldering Tools