Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Chris G.

#13011

CABGA Test Socket | 11 January, 1999

I'm looking for a CABGA test socket for a 2 CABGAs. One 81 ball CABGA is 9mm x 9mm with .46 mm dia balls on .8mm pitch. The other is a 64 ball CABGA 8mm x 8mm with .46 mm dia balls on .8mm pitch. I need to pretest CABGAs before placement due to high die fallout used in the CABGAs.

Thanks,

Chris

reply »

Dave F

#13012

Re: CABGA Test Socket | 13 January, 1999

| I'm looking for a CABGA test socket for a 2 CABGAs. One 81 ball CABGA is 9mm x 9mm with .46 mm dia balls on .8mm pitch. The other is a 64 ball CABGA 8mm x 8mm with .46 mm dia balls on .8mm pitch. I need to pretest CABGAs before placement due to high die fallout used in the CABGAs. | | Thanks, | | Chris | Chris: Try these guys. TTYL Dave F

Oztech 510.782.2654fax2656 Ironwood Electronics 612.452.8100 fax 8400 www.ironwoodelectronics.com Advanced Interconnects West Warwick, RI (401) 823-5200 fax 8723 Howard Gonzales Wells CTI 2102 West Quail Ave Phoenix AZ 85027 602.581.5330 fax 780.3987 www.wellscti.com E-tec (0.75mm upward) 408.746.2800 fax0969 www.e-tec.ch BallNest/BallLock (1.27mm and 1.59mm) Frenchtown, N.J., phone: (908) 996-6841 Fax: (908) 996-3891 www.arieselec.com Emulation Solutions Sunnyvale, CA www.adapters.com; tel:408-745-1524 Yamaichi Electronics 408-456-0797 Ed Glinden edward.g@yeu.com

reply »

Chris G.

#13013

Re: CABGA Test Socket | 14 January, 1999

| | I'm looking for a CABGA test socket for a 2 CABGAs. One 81 ball CABGA is 9mm x 9mm with .46 mm dia balls on .8mm pitch. The other is a 64 ball CABGA 8mm x 8mm with .46 mm dia balls on .8mm pitch. I need to pretest CABGAs before placement due to high die fallout used in the CABGAs. | | | | Thanks, | | | | Chris | | | Chris: Try these guys. TTYL Dave F | | Oztech 510.782.2654fax2656 | Ironwood Electronics 612.452.8100 fax 8400 www.ironwoodelectronics.com | Advanced Interconnects West Warwick, RI | (401) 823-5200 fax 8723 Howard Gonzales | Wells CTI 2102 West Quail Ave Phoenix AZ 85027 602.581.5330 fax 780.3987 www.wellscti.com | E-tec (0.75mm upward) 408.746.2800 fax0969 www.e-tec.ch | BallNest/BallLock (1.27mm and 1.59mm) Frenchtown, N.J., phone: (908) 996-6841 Fax: (908) 996-3891 www.arieselec.com | Emulation Solutions Sunnyvale, CA | www.adapters.com; tel:408-745-1524 | Yamaichi Electronics 408-456-0797 Ed Glinden edward.g@yeu.com | | Dave,

Thanks for the info. I found a socket for the 8mm x 8mm CABGA. The 9mm x 9mm is custom since the package was a custom made CABGA. Way to expensive. I will have to find another way.

Thanks,

Chris

reply »

PCB Soldering Tools

FPC* - Fluid Pressure Control - Dispensing Pump