Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


looking for a mnaul Surface Mount prototype assembly workstation

Brian G Bancroft

#12614

looking for a mnaul Surface Mount prototype assembly workstation | 17 February, 1999

Hello all in SMT land:

My name is Brian G Bancroft and I work for Lucent Technologies in New jersey. I have been asked to try and find information on a bench top workstation with micro-manipulation ability, soldering capability and binocular magnification for the operator.

This unit or set of sub units will be used to build prototype circuit boards with surface mount resistors and other components on a "1-off" prototype basis. Iy may also be used for repair/replacement of components on previously designed boards.

I have been browsing the internet, but I would appreciate anyone who could direct me to a vendor or vendors who specialize in or carry a line of these types of workstations. Please respond directly to:

bgb@lucent.com or (732) 957 6192

Thanks for your assistance.

reply »

Karl Mighton

#12615

Re: looking for a mnaul Surface Mount prototype assembly workstation | 17 February, 1999

| Hello all in SMT land: | | My name is Brian G Bancroft and I work for Lucent Technologies in New jersey. I have been asked to try and find information on a bench top workstation with micro-manipulation ability, soldering capability and binocular magnification for the operator. | | This unit or set of sub units will be used to build prototype circuit boards with surface mount resistors and other components on a "1-off" prototype basis. Iy may also be used for repair/replacement of components on previously designed boards. | | I have been browsing the internet, but I would appreciate anyone who could direct me to a vendor or vendors who specialize in or carry a line of these types of workstations. Please respond directly to: | | bgb@lucent.com or (732) 957 6192 | | Thanks for your assistance. |

reply »

Zboss

#12616

Re: looking for a mnaul Surface Mount prototype assembly workstation | 17 February, 1999

| | Hello all in SMT land: | | | | My name is Brian G Bancroft and I work for Lucent Technologies in New jersey. I have been asked to try and find information on a bench top workstation with micro-manipulation ability, soldering capability and binocular magnification for the operator. | | | | This unit or set of sub units will be used to build prototype circuit boards with surface mount resistors and other components on a "1-off" prototype basis. Iy may also be used for repair/replacement of components on previously designed boards. | | | | I have been browsing the internet, but I would appreciate anyone who could direct me to a vendor or vendors who specialize in or carry a line of these types of workstations. Please respond directly to: | | | | bgb@lucent.com or (732) 957 6192 | | | | Thanks for your assistance. | | | |

reply »

Zboss

#12617

Re: looking for a mnaul Surface Mount prototype assembly workstation | 17 February, 1999

| | | Hello all in SMT land: | | | | | | My name is Brian G Bancroft and I work for Lucent Technologies in New jersey. I have been asked to try and find information on a bench top workstation with micro-manipulation ability, soldering capability and binocular magnification for the operator. | | | | | | This unit or set of sub units will be used to build prototype circuit boards with surface mount resistors and other components on a "1-off" prototype basis. Iy may also be used for repair/replacement of components on previously designed boards. | | | | | | I have been browsing the internet, but I would appreciate anyone who could direct me to a vendor or vendors who specialize in or carry a line of these types of workstations. Please respond directly to: | | | | | | bgb@lucent.com or (732) 957 6192 | | | | | | Thanks for your assistance. | | | | | | | | | You might want to look into a Fritsch or you can contact Novastar they are trying to get into the area vacated by O.K. Industries.

reply »

ii-feed SMT Intelligent Feeder

Plasma Prior to Conformal Coating