Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Jason Hall

#12370

MarkEdit on Fuji | 9 March, 1999

When a board has loaded into the machine and the fiducials do not line up I have tried to use mark edit to set an offset into the program. I lined up the crosshairs and set the data. For some reason the machine did not accept this info. Does anyone have any ideas on why this didn't work? I know how to put the offset into the program through an editer. I am just wondering why this option is here if it does not work!

Thanks in advance,

reply »

Dean

#12371

Re: MarkEdit on Fuji | 9 March, 1999

| When a board has loaded into the machine and the fiducials do not line up I have tried to use mark edit to set an offset into the program. I lined up the crosshairs and set the data. For some reason the machine did not accept this info. Does anyone have any ideas on why this didn't work? I know how to put the offset into the program through an editer. I am just wondering why this option is here if it does not work! | | Thanks in advance, | You can disable the editor screen in proper. Yours is set to automatically apear on a failed mark read. I too have this problem. It won't allow the operator to "set" the mark position. Try Fuji America @ 1-847-913-0162 (service department). When you find out post a reply...

Good luck, Dean

reply »

SMT Custom Nozzles

PCB machines