Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Dave Manero

#12250

jedic qfp trays | 16 March, 1999

I am looking for the dimensions of the qfp trays. I need to no the center to center as well as the edge to center. I will use this information to program the fuji QP machine for placing 44pin QFP from the tray, or other devices. I can measure this by hand but it would be nice to get the actual dimensions so it would be more accurate. If there is a place to get this information please let me know. Are there Jedic standards which have this information?

Thanks

reply »

Ben Kirk

#12251

Re: jedic qfp trays | 16 March, 1999

| I am looking for the dimensions of the qfp trays. I need to no the center to center as well as the edge to center. I will use this information to program the fuji QP machine for placing 44pin QFP from the tray, or other devices. I can measure this by hand but it would be nice to get the actual dimensions so it would be more accurate. | If there is a place to get this information please let me know. | Are there Jedic standards which have this information? | | Thanks | I believe you can order a book which will have just about every tray demintion you can think of. Try looking on www.jedec.com they may have what you�re looking for.

Ben

reply »

SMT Custom Nozzles