Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Universal NCC8 head

Scott Birnbaum

#12118

Universal NCC8 head | 29 March, 1999

Can anyone give me information about a NCC8 (?) head for the Universal GSM's. Thats the one w/ four spindles and onboard vision (not flex jet however). Are there any maintenance issues with this style head? Is the onboard camera system accurate? How easy is the calibration procedure? I understand the operators must change nozzles by hand. How difficult is it to do this? I am considering putting a NCC8 head on the back side of the Flex2 head that is currently on the GSM. One beam, two heads. Does this present any problems? Any other tidbits of information is appreciated. Thanks in advance, Scott Birnbaum

reply »

Jim Boudia

#12119

Re: Universal NCC8 head | 1 April, 1999

| Can anyone give me information about a NCC8 (?) head for the Universal GSM's. Thats the one w/ four spindles and onboard vision (not flex jet however). Are there any maintenance issues with this style head? Is the onboard camera system accurate? How easy is the calibration procedure? I understand the operators must change nozzles by hand. How difficult is it to do this? I am considering putting a NCC8 head on the back side of the Flex2 head that is currently on the GSM. One beam, two heads. Does this present any problems? Any other tidbits of information is appreciated. | Thanks in advance, | Scott Birnbaum | |

:( It sounds like your trying to increase machine capacity by modifying an existing machine. Why not consider adding another chip shooter to your line?

reply »

PCB machines

FPC* - Fluid Pressure Control - Dispensing Pump