Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


looking for bga rework station

greg c

#12039

looking for bga rework station | 8 April, 1999

I am looking for a BGA rework/placement system and would like any experience that you have had. I am looking for a system that is reasonable for the placment, removing and re-balling

thank you

reply »

Dean

#12040

Re: looking for bga rework station | 8 April, 1999

| I am looking for a BGA rework/placement system and would like any experience that you have had. I am looking for a system that is reasonable for the placment, removing and re-balling | | thank you | -I have had wonderful results with SRT. Check out -srtonline.com 978-392-0633

I'm not sure exactly what "reasonable" is but they make solid equipment. Regards, Dean

reply »

Bob Barr

#12041

Re: looking for bga rework station | 9 April, 1999

I have been using an Air-Vac DRS-22 for almost two years with very good results. Once a profile is developed it is very repeatable. The DRS-22 is no longer available, however. It has been replaced by the DRS-24. Unfortunately, the DRS-24 has a lot of bells and whistles and has become too expensive in my opinion. I have heard that it may be possible to get a stripped down version. Or, look for a DRS-22 on the used market. Like all Air-Vac products it is built solid and will stand up to everyday use. The optics are very good. We use it for BGA and QFP (20 mil) removal and placement (not re-balling.) It is worth considering. Their number is 203-888-9900.

Bob

| I am looking for a BGA rework/placement system and would like any experience that you have had. I am looking for a system that is reasonable for the placment, removing and re-balling | | thank you |

reply »

Jeff Price

#12042

Re: looking for bga rework station | 10 April, 1999

| | I am looking for a BGA rework/placement system and would like any experience that you have had. I am looking for a system that is reasonable for the placment, removing and re-balling | | | | thank you | | | -I have had wonderful results with SRT. Check out -srtonline.com 978-392-0633 | | I'm not sure exactly what "reasonable" is but they make solid equipment.

| Regards, | Dean | Disclaimer: I represent this product locally in WI & IL

OK Industries/Metcal has a good system it is a Model 3500 with image overlay vision,good software,micro BGA capability and a micro stencil screen printer with vision. The strongest point of the system that I have seen is that the software and systems are simplistic and very easily learned by operators. This is a system you may also want to include in your evaluation. OK/Metacl 650 325 3291

Jeff

reply »

David

#12043

Re: looking for bga rework station | 13 April, 1999

| I am looking for a BGA rework/placement system and would like any experience that you have had. I am looking for a system that is reasonable for the placment, removing and re-balling | | thank you | You might want to look at Advanced Techniques also - AT-606 for the basic system, with a computer AT-606C. 215 364 5588.

reply »

pcb components X-ray inspection