Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


PCB Prototypes

Haitham Sakr

#11554

PCB Prototypes | 6 May, 1999

I need to buy some tools for PCB prtotypes manufacturing can you tell me the best place & the best price from where I can order :

> 1. PCB boards coated with photoresist both Single & Double sided baords especially the double one with dimensions of 1 m square or 1/2 m square with a life guarntee not less than 3 years. > 2. Photoresist spray bottles of 200ml or more. > 3. Solder & DeSolder tools a complete kit that can be used for >both SMD & Through Hole comp,with antistatic protection and temp.control for soldering IC directly to the board. > 4. I need to make a green mask on the PCB to cover the tracks "Solder Mask" and a silkscreen layer for showing Comp. outlines, are there any utilities that I can buy to do these jobs. > 5. For MultiLayer PCB is there any special PCb type for the inner layers ?

Sorry for all these questions, but I'll be thankfull if you >guide me to the correct answers, wishing you my best regards.....Thanks

reply »

#11555

Re: PCB Prototypes | 6 May, 1999

| I need to buy some tools for PCB prtotypes manufacturing can you | tell me the best place & the best price from where I can order : | | > 1. PCB boards coated with photoresist both Single & Double sided baords especially the double one with dimensions of 1 m square or 1/2 m square with a life guarntee not less than 3 years. | > 2. Photoresist spray bottles of 200ml or more. | > 3. Solder & DeSolder tools a complete kit that can be used for | >both SMD & Through Hole comp,with antistatic protection and temp.control for soldering IC directly to the board. | > 4. I need to make a green mask on the PCB to cover the tracks "Solder Mask" and a silkscreen layer for showing Comp. outlines, | are there any utilities that I can buy to do these jobs. | > 5. For MultiLayer PCB is there any special PCb type for the | inner layers ? | | Sorry for all these questions, but I'll be thankfull if you | >guide me to the correct answers, wishing you my best regards.....Thanks | | Try this:

reply »

BGA Rework Services

StikNPeel™ Rework Stencils