Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Jacqueline Coia

#11033

conformal coatings | 15 June, 1999

Could anyone please give me any information or obtainable references concerning proper guidelines for the application of conformal coatings (double comp.type) using both methods of spraying and dipping. Information must also include best instrument for measuring the viscosity. Much appreciated.

reply »

Ken Lester

#11034

Re: conformal coatings | 15 June, 1999

| Could anyone please give me any information or obtainable references concerning proper guidelines for the application of conformal coatings (double comp.type) using both methods of spraying and dipping. Information must also include best instrument for measuring the viscosity. | Much appreciated. | There are several Specifications that indicated the requirements for varying application types. The MIl STd 46058 is one of the more comprehensive specs. also IPC/ ANsi have a spec that may be of some interest. I hope this is of some help

Ken Lester Lescon

reply »

Graham Naisbitt

#11035

Re: conformal coatings | 16 June, 1999

| Could anyone please give me any information or obtainable references concerning proper guidelines for the application of conformal coatings (double comp.type) using both methods of spraying and dipping. Information must also include best instrument for measuring the viscosity. | Much appreciated. | Jacqueline

Please refer to the newly released IPC-CC-830B, it should answer most of your questions.

However, as far as a handbook / guidline is concerned, let me have your mail address and I will send you considerably more data.

Regards, Graham

reply »

armin

#11036

Re: conformal coatings | 22 June, 1999

Hi Graham, can u send me some conformal coating guidelines. i'm also interested ! my e-mail add is armin.tan@setec.com.au

thanks

| | Could anyone please give me any information or obtainable references concerning proper guidelines for the application of conformal coatings (double comp.type) using both methods of spraying and dipping. Information must also include best instrument for measuring the viscosity. | | Much appreciated. | | | Jacqueline | | Please refer to the newly released IPC-CC-830B, it should answer most of your questions. | | However, as far as a handbook / guidline is concerned, let me have your mail address and I will send you considerably more data. | | Regards, Graham |

reply »

Reflow Ovens thermal process improvement

Essemtec Fox Compact Automatic Pick and Place