Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Jennifer

#10654

U.S. number for EKRA? | 13 July, 1999

Does anyone have a US or North American phone and address contact for EKRA (Eduard Kraft)?

I have been told by several people that there is a small office here in the US, but so far I've been unable to locate it.

Any assistance is appreciated!

Jennifer

reply »

John Thorup

#10655

Re: U.S. number for EKRA? | 13 July, 1999

| Does anyone have a US or North American phone and address contact for EKRA (Eduard Kraft)? | | I have been told by several people that there is a small office here in the US, but so far I've been unable to locate it. | | Any assistance is appreciated! | | Jennifer | run a search for EKRA in the SMTnet industry directory and you will find four matches. One is EKRA in Germany. I' sure they could tell you. There are also three US matches. good luck. John Thorup

reply »

Jennifer

#10656

Re: U.S. number for EKRA? | 13 July, 1999

| | Does anyone have a US or North American phone and address contact for EKRA (Eduard Kraft)? | | | | I have been told by several people that there is a small office here in the US, but so far I've been unable to locate it. | | | | Any assistance is appreciated! | | | | Jennifer | | | run a search for EKRA in the SMTnet industry directory and you will find four matches. One is EKRA in Germany. I' sure they could tell you. There are also three US matches. good luck. | John Thorup

Thanks John. I'm trying to avoid calling EKRA in Germany, and still holding out hope for an American office. The other three were resellers, one in the US, the others in Belgium and Singapore, so I'll try the US reseller and see what I can learn. Thanks again.

reply »

Dan Lambert

#10657

Re: U.S. number for EKRA? | 13 July, 1999

Jennifer,

Try calling Jim Berhnard at PAA. His number is (508) 695-7557. He is the person you need to talk to.

Dan

| Does anyone have a US or North American phone and address contact for EKRA (Eduard Kraft)? | | I have been told by several people that there is a small office here in the US, but so far I've been unable to locate it. | | Any assistance is appreciated! | | Jennifer |

reply »

#10658

Re: U.S. number for EKRA? | 14 July, 1999

| | | Does anyone have a US or North American phone and address contact for EKRA (Eduard Kraft)? | | | | | | I have been told by several people that there is a small office here in the US, but so far I've been unable to locate it. | | | | | | Any assistance is appreciated! | | | | | | Jennifer | | |

| | run a search for EKRA in the SMTnet industry directory and you will find four matches. One is EKRA in Germany. I' sure they could tell you. There are also three US matches. good luck. | | John Thorup | | | Thanks John. I'm trying to avoid calling EKRA in Germany, and still holding out hope for an American office. The other three were resellers, one in the US, the others in Belgium and Singapore, so I'll try the US reseller and see what I can learn. Thanks again.

Jennifer, We are the sales reps for EKRA in southern California. Jim Bernhard is the person to talk to in the US. I would gladly provide you with more info. You can reach me via email, our site is www.advprecision.com | | |

reply »

#10659

Re: U.S. number for EKRA? | 8 September, 1999

| | | | Does anyone have a US or North American phone and address contact for EKRA (Eduard Kraft)? | | | | | | | | I have been told by several people that there is a small office here in the US, but so far I've been unable to locate it. | | | | | | | | Any assistance is appreciated! | | | | | | | | Jennifer | | | | | | | | | run a search for EKRA in the SMTnet industry directory and you will find four matches. One is EKRA in Germany. I' sure they could tell you. There are also three US matches. good luck. | | | John Thorup | | | | | | Thanks John. I'm trying to avoid calling EKRA in Germany, and still holding out hope for an American office. The other three were resellers, one in the US, the others in Belgium and Singapore, so I'll try the US reseller and see what I can learn. Thanks again. | | | Jennifer, | We are the sales reps for EKRA in southern California. Jim Bernhard is the person to talk to in the US. I would gladly provide you with more info. You can reach me via email, our site is www.advprecision.com | | | | | | | | Jennifer, I just wanted to let you know that the English version of EKRA's website is now up and running. www.ekra.com

reply »

PCB Buffers

SMT Equipment Online Auctions