Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


1005 using Fuji CP3 CP4-3

#10372

1005 using Fuji CP3 CP4-3 | 28 July, 1999

Dear Forum Members,

Is their anyone who is familar with 1005 placement using a Fuji CP3 and a CP4-3 to perform at CP642 spec's? I have heard of a number of companies doing this. Are there any tech sheets or other site's that may have this procedure posted? Your assistance is grealty appreciated.

Jay jason@tekmart.com

reply »

KEVIN SIMPSON

#10373

Re: 1005 using Fuji CP3 CP4-3 | 29 July, 1999

| Dear Forum Members, | | Is their anyone who is familar with 1005 placement using a Fuji CP3 and a CP4-3 to perform at CP642 spec's? I have heard of a number of companies doing this. Are there any tech sheets or other site's that may have this procedure posted? Your assistance is grealty appreciated. | | Jay | jason@tekmart.com | Hi Jason, We have been placing 1005's with CP43'S for a while now.What spec's are you refering to? A 43 will not carry at a 642 speed of course,but as far as placement it handles it well.You will have to put .7 nozzles in your cp43's,but you should not have any problems. If you have any specific questions ,please feel free to ask. Kevin Simpson SMT/SPC ENGINEER SOLECTRON GA KEVINSIMPSON@GA.SLR.COM

reply »

SMT Custom Nozzles

pcb components vacuum pick up