Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Where can I get delmat material

Mike F

#9945

Where can I get delmat material | 25 August, 1999

Can anyone tell me where I can get a good lightweight material to use for a soldering fixture? I need to make various fixtures to hold LED's vertical during the soldering process, and keep them from floating up off the board surface.

At a different job we used something called delmat, but I don't know where it was purchased.

I appreciate any suggestions, various of our boards have over 500 LED's to keep in position.

Mike

reply »

Ray Hare

#9946

Re: Where can I get delmat material | 25 August, 1999

| Can anyone tell me where I can get a good lightweight material to use for a soldering fixture? I need to make various fixtures to hold LED's vertical during the soldering process, and keep them from floating up off the board surface. | | At a different job we used something called delmat, but I don't know where it was purchased. | | I appreciate any suggestions, various of our boards have over 500 LED's to keep in position. | | Mike |

reply »

ray hare

#9947

Re: Where can I get delmat material | 25 August, 1999

| | Can anyone tell me where I can get a good lightweight material to use for a soldering fixture? I need to make various fixtures to hold LED's vertical during the soldering process, and keep them from floating up off the board surface. | | | | At a different job we used something called delmat, but I don't know where it was purchased. | | | | I appreciate any suggestions, various of our boards have over 500 LED's to keep in position. | | | | Mike | | | | Hi Mike, I had some board handling fixtures made out of delmat. The company I used was TEKNEK electronics in Scotland. They will be able to tell you where they get the material from. Phone number is 01505 824249.

hope this is of help. Ray Hare

reply »

PeterB

#9948

Re: Where can I get delmat material | 25 August, 1999

| Can anyone tell me where I can get a good lightweight material to use for a soldering fixture? I need to make various fixtures to hold LED's vertical during the soldering process, and keep them from floating up off the board surface. | | At a different job we used something called delmat, but I don't know where it was purchased. | | I appreciate any suggestions, various of our boards have over 500 LED's to keep in position. | | Mike | Mike

Another excellent supplier of CDM (composite Delmat material) is Rochling Materials Ltd. They can supply both conductive and non -conductive types and are able to machine to your specification.

I've had many wavesolder pallets made by them over the years and their quialty has been very good. They can take CAD data or even a sample asembly.

They can be contacted on:

Tel: 01453 827887 Fax: 01453 827524 E-mail:Roechmat@compuserve.com

reply »

#9949

Re: Where can I get delmat material | 25 August, 1999

| | Can anyone tell me where I can get a good lightweight material to use for a soldering fixture? I need to make various fixtures to hold LED's vertical during the soldering process, and keep them from floating up off the board surface. | | | | At a different job we used something called delmat, but I don't know where it was purchased. | | | | I appreciate any suggestions, various of our boards have over 500 LED's to keep in position. | | | | Mike | | | Mike | | Another excellent supplier of CDM (composite Delmat material) is Rochling Materials Ltd. They can supply both conductive and non -conductive types and are able to machine to your specification. | | I've had many wavesolder pallets made by them over the years and their quialty has been very good. They can take CAD data or even a sample asembly. | | They can be contacted on: | | Tel: 01453 827887 | Fax: 01453 827524 | E-mail:Roechmat@compuserve.com | These are primarily fixture manufacturers I believe. I don't know if they will sell the raw material. EES/Grip Technogies in Weston Ct. 203/226-1357 MB Manufacturing in Rockaway, New Jersey 201/586-2988

reply »

Tony

#9950

Re: Where can I get delmat material | 25 August, 1999

| Can anyone tell me where I can get a good lightweight material to use for a soldering fixture? I need to make various fixtures to hold LED's vertical during the soldering process, and keep them from floating up off the board surface. | | At a different job we used something called delmat, but I don't know where it was purchased. | | I appreciate any suggestions, various of our boards have over 500 LED's to keep in position. | | Mike | Hi Mike, I have purchast CDM (Composit Delmat Material) from Polymer @ 645 National Ave. Mountain View CA. 94043 (650) 968-2212. I worked for a contract manufacturing house and most of the assemblies that are being build there required either process carriers or wave solder fixures. So I trained a Machine Shop Next door in making these fixures, now they stock the CDM. I can get fixures the same day and just the way I want them. Just in case their number is (619) 536-1566.

Thanks

Tony A

reply »

DaveH

#9951

Re: Where can I get delmat material | 25 August, 1999

Mike, Try EMC Global Technologies at 215-340-0650 They can help you with a full range of composites in either full sheet or cut to size. They also have full design and manufacture capabilities.

reply »

Chad Haima

#9952

Re: Where can I get delmat material | 26 August, 1999

| Can anyone tell me where I can get a good lightweight material to use for a soldering fixture? I need to make various fixtures to hold LED's vertical during the soldering process, and keep them from floating up off the board surface. | | At a different job we used something called delmat, but I don't know where it was purchased. | | I appreciate any suggestions, various of our boards have over 500 LED's to keep in position. | | Mike | Mike, We sell delmat as raw material or a finished good(fixtures). Give me a call or check us out on the web

Chad S.P. Precision Int'l 800-725-5388 www.spprecision.com

reply »

Boundary Scan

PCB Rework / Repair Services