Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Reliability test on PCBA

teohbengee

#2138

Reliability test on PCBA | 21 December, 2000

Need help urgently. Anyone can provide me some information or site on reliability test on PCB assembly like solder joint or anything. Some test like ERSA Test, SHMOO Test, Pull Test, Temperature cycle and humidity Test, vibration Test or any related reliability test. Thanks for ur information and help.

Regards, KEITH

reply »


CAL

#2139

Re: Reliability test on PCBA | 21 December, 2000

Keith - please call our help line a 610-362-1320. The information you request needs more clarification and can be better discussed via a telephone call. Sorry not to provide a definitive answer nor to provide a solution for others on SMTNET but your question can best be handled over the telephone. The person answering typically is an engineer let them know I email you with this information. We do reliability testing on a daily basis and I am sure we can help Best regards, Cal

reply »

Dason C

#2140

Re: Reliability test on PCBA | 21 December, 2000

Keith, please check http://www.motorola.com/GSS/CSG/Asia/English2/Help/ALT/alt.html for detail.

Rgds. Dason

reply »

teohbengee

#2141

Re: Reliability test on PCBA | 21 December, 2000

Thanks for ur help. But i dun think i will call u bcoz i am in MALAYSIA. What i need is just information of how to carry out or design a test to test for the PCBA reliability. If u can send me some infomation on this, i will be very appreaciated. Thanks for ur help again.

reply »

teohbengee

#2142

Re: Reliability test on PCBA | 21 December, 2000

Thanks Dacon. I try to access the URL that u send me. But i cannot access. Is that intranet? Can u send me the URL again? Thank U. Ur help will be appreciated. Thanks.

reply »

#2143

Re: Reliability test on PCBA | 21 December, 2000

Sorry, but I'm a bit fuzzy on the goal here. Let me be basic. The basic reasons for reducing the life of products before they're shipped are: * Design qualification. This highly accelerated test beats the living stuff out of products to identify design, component, process, etc weaknesses in order to correct these weaknesses before exposing customers the product. * Accelerated reliability testing. This accelerated test provides confidence that the design and manufacturing process are capable of meeting the goals for product performance.

reply »

Dason C

#2144

Re: Reliability test on PCBA | 23 December, 2000

Keith, I try and the address is correct. Please check the link below again.

Good luck & Merry X'mas. Dason

reply »

teohbengee

#2145

Re: Reliability test on PCBA | 1 January, 2001

Dason, i tried already but still cannot. I do think that this add is an intranet. Cannot access externally.

reply »

Dason

#2146

Re: Reliability test on PCBA | 2 January, 2001

Keith, please go to www.mot.com and key in "life test" in the search column.

Happy New Year!! Dason

reply »

pcb components X-ray inspection

Used SMT