Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Basics of SMT - Tutorial

Bill Lang

#9352

Basics of SMT - Tutorial | 23 September, 1999

I need to put together some quickie training material for our customer service people. I've only got about 30 minutes to describe the SMT process in a nutshell, so it can't be lengthy and detailed. A ppt file would be best. Is there anything available on the net that provides overall flow and brief descriptions & photos for each of the major process steps. I've found bits and pieces, but nothing cohesive.

Any leads would be greatly appreciated.

reply »

#9353

Re: Basics of SMT - Tutorial | 23 September, 1999

| I need to put together some quickie training material | for our customer service people. I've only got about 30 minutes | to describe the SMT process in a nutshell, so it can't be lengthy and detailed. A ppt file would be best. | Is there anything available on the net that provides overall flow and brief descriptions & photos for each of the major process steps. I've found bits and pieces, but nothing cohesive. | | Any leads would be greatly appreciated. | Bill: Try this

reply »

Brian

#9354

Re: Basics of SMT - Tutorial | 24 September, 1999

| I need to put together some quickie training material | for our customer service people. I've only got about 30 minutes | to describe the SMT process in a nutshell, so it can't be lengthy and detailed. A ppt file would be best. | Is there anything available on the net that provides overall flow and brief descriptions & photos for each of the major process steps. I've found bits and pieces, but nothing cohesive. | | Any leads would be greatly appreciated. | Bill

There is a wealth of info in 15 steps at the URL below. It is too lengthy for a presentation but could be useful a) as a checklist that you have missed nothing significant out and b) as the basis for a "further reading" handout.

The whole of the www.albert.co.uk site is humoungously useful, interesting, informative and even amusing. It is published by the PCIF as a service, essentially addressing SMT users or wannabes.

Best regards

Brian

reply »

Brian

#9355

Re: Basics of SMT - Tutorial | 24 September, 1999

| | I need to put together some quickie training material | | for our customer service people. I've only got about 30 minutes | | to describe the SMT process in a nutshell, so it can't be lengthy and detailed. A ppt file would be best. | | Is there anything available on the net that provides overall flow and brief descriptions & photos for each of the major process steps. I've found bits and pieces, but nothing cohesive. | | | | Any leads would be greatly appreciated. | | | Bill | | There is a wealth of info in 15 steps at the URL below. It is too lengthy for a presentation but could be useful a) as a checklist that you have missed nothing significant out and b) as the basis for a "further reading" handout. | | The whole of the www.albert.co.uk site is humoungously useful, interesting, informative and even amusing. It is published by the PCIF as a service, essentially addressing SMT users or wannabes. | | Best regards | | Brian | Sorry! Forgot to say "Click on SMT Overview"

reply »

JohnW

#9356

Re: Basics of SMT - Tutorial | 24 September, 1999

| | I need to put together some quickie training material | | for our customer service people. I've only got about 30 minutes | | to describe the SMT process in a nutshell, so it can't be lengthy and detailed. A ppt file would be best. | | Is there anything available on the net that provides overall flow and brief descriptions & photos for each of the major process steps. I've found bits and pieces, but nothing cohesive. | | | | Any leads would be greatly appreciated. | | | Bill: Try this | Bill,

Another magazine that has an excellent encyclopedia is EP the address is below, go to the encyclopedia and select the area's you want.

JohnW

reply »

JohnW

#9357

Re: Basics of SMT - Tutorial | 24 September, 1999

| | | I need to put together some quickie training material | | | for our customer service people. I've only got about 30 minutes | | | to describe the SMT process in a nutshell, so it can't be lengthy and detailed. A ppt file would be best. | | | Is there anything available on the net that provides overall flow and brief descriptions & photos for each of the major process steps. I've found bits and pieces, but nothing cohesive. | | | | | | Any leads would be greatly appreciated. | | | | | Bill: Try this | | | Bill, | | Another magazine that has an excellent encyclopedia is EP the address is below, go to the encyclopedia and select the area's you want. | | JohnW | And this time with the link

reply »

Bill

#9358

Re: Basics of SMT - Tutorial | 24 September, 1999

| | | I need to put together some quickie training material | | | for our customer service people. I've only got about 30 minutes | | | to describe the SMT process in a nutshell, so it can't be lengthy and detailed. A ppt file would be best. | | | Is there anything available on the net that provides overall flow and brief descriptions & photos for each of the major process steps. I've found bits and pieces, but nothing cohesive. | | | | | | Any leads would be greatly appreciated. | | | | | Bill | | | | There is a wealth of info in 15 steps at the URL below. It is too lengthy for a presentation but could be useful a) as a checklist that you have missed nothing significant out and b) as the basis for a "further reading" handout. | | | | The whole of the www.albert.co.uk site is humoungously useful, interesting, informative and even amusing. It is published by the PCIF as a service, essentially addressing SMT users or wannabes. | | | | Best regards | | | | Brian | | | Sorry! Forgot to say "Click on SMT Overview" | Hi Brian .... that is a GREAT link!!! Thanks kindly ... Bill

reply »

Bill

#9359

Re: Basics of SMT - Tutorial | 24 September, 1999

| | | | I need to put together some quickie training material | | | | for our customer service people. I've only got about 30 minutes | | | | to describe the SMT process in a nutshell, so it can't be lengthy and detailed. A ppt file would be best. | | | | Is there anything available on the net that provides overall flow and brief descriptions & photos for each of the major process steps. I've found bits and pieces, but nothing cohesive. | | | | | | | | Any leads would be greatly appreciated. | | | | | | | Bill: Try this | | | | | Bill, | | | | Another magazine that has an excellent encyclopedia is EP the address is below, go to the encyclopedia and select the area's you want. | | | | JohnW | | | And this time with the link | Hi John .... thanks for the tip. Unfortunately, the link brings up an error msg. I'll try to hit it directly. Thanks again! ... Bill

reply »

3D SPI

PCB Routers