Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Solder pasted applied by PCB manufactuer

Charlie

#9266

Solder pasted applied by PCB manufactuer | 28 September, 1999

There is a company selling pcb with the solder past on the pads and coated with a tacky film to hold the part during assembly. Have you heard of them and can you tell me how to contact them?

reply »

Scott Cook

#9267

Re: Solder pasted applied by PCB manufactuer | 28 September, 1999

| There is a company selling pcb with the solder past on the pads and coated with a tacky film to hold the part during assembly. Have you heard of them and can you tell me how to contact them? |

Contact Matt Kehoe at 770-475-4576 or 847-740-4120

Tell Him I sent you......and ask him what I left in his booth crate for him to find months later, after he left a show late one night. There *is* a story there!

Here's some sites http://www.lamons.com/sssl4.html http://www.midwestpcb.com/sales/kehoe/sipage1.html

Scott Cook

reply »

Mark Quealy

#9268

Re: Solder pasted applied by PCB manufactuer | 29 September, 1999

| | There is a company selling pcb with the solder past on the pads and coated with a tacky film to hold the part during assembly. Have you heard of them and can you tell me how to contact them? | | | | Contact Matt Kehoe at 770-475-4576 or 847-740-4120 | | Tell Him I sent you......and ask him what I left in his booth crate for him to find months later, after he left a show late one night. There *is* a story there! | | Here's some sites | http://www.lamons.com/sssl4.html | http://www.midwestpcb.com/sales/kehoe/sipage1.html | | | Scott Cook | | I was just reading an article in SMT Magazine (Feb. 1998, pg 56)(so my pile is high!) titled 'End Paste Defects with Solid Solder Deposits. I found it very interesting and I would like to hear of anything you find. I plan on some research myself. If you don't have the SMT issue I can fax it to you. Mark

reply »

Used PCB Equipment - AdoptSMT

PCB X-Ray Inspection