Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


IP3 Zero without Reboot???

Larry Johnson

#8424

IP3 Zero without Reboot??? | 24 November, 1999

I know there is a way to zero an IP3 with out reboot the whole machine. From page zero hold down F6 and something else. This would really come in handy. If you know how, could you please let me know. Thanks in advance...

Larry J

reply »


JAX

#8425

Re: IP3 Zero without Reboot??? | 24 November, 1999

Larry, Check the archives. You can even look under your own name. You have anwsered this question in the passed(**)

reply »

#8426

Re: IP3 Zero without Reboot??? | 25 November, 1999

What's going on guys. How are you doing? Just saying hello. Talk to you later....

reply »

Doug

#8427

Re: IP3 Zero without Reboot??? | 28 November, 1999

Larry,

To zero the IP3, you hold down the "-" key and press "F5" (set), then F6 to go back to page zero, then sero the machine. On the CP6 you hold down the "-" key and press F6.

Doug L.

reply »

Ben Kirk

#8428

Re: IP3 Zero without Reboot??? | 29 November, 1999

Mike I guess Larry and Jax are too good to speak to us now. Or they lost our e-mail addresses. Just kidding guys how is everything going?

B

reply »


JAX

#8429

Re: IP3 Zero without Reboot??? | 29 November, 1999

I sent you an e-mail last week! Did you recieve it?

Jax

reply »

Larry Johnson

#8430

Re: IP3 Zero without Reboot??? | 30 November, 1999

Okay guys... The SMT Forum is not used to communicate with one another YOU GOT IT!!! You are all going to get his kicked off of this thing!!!!

Smiles Larry J

reply »

Bubba

#8431

Re: IP3 Zero without Reboot??? | 30 November, 1999

Yea! What are Y'ALL thinking about!?

:) B

reply »

EmJay

#8432

Re: IP3 Zero without Reboot??? | 30 November, 1999

Also on the CP-6 if you hit (F5) (F5) while the start button is blinking it will keep the turret from doing a nozzle origin search. Which is useful when.....Larry?

reply »

Larry Johnson

#8433

Re: IP3 Zero without Reboot??? | 30 November, 1999

Who is EmJay?????

reply »

SMT Machines

PCB Routers