Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Program Conversion

Views: 4869

#78867

Program Conversion | 12 September, 2017

Hello,

We currently have Samsung CP45FV and SM45IFC pick and place machines and are looking to invest in two new Fuji NXT III SMT lines. I'm looking for a conversion software that will convert our existing programs to Fuji format. Is there any software out there currently that can perform this?

Thanks

reply »

#78868

Program Conversion | 12 September, 2017

You should call Factory Logics or Valor, or any other of these systems and ask them if they can do exactly what you need. I know for a fact that these platforms can create P&P files for many of the placement systems out there.

reply »

#78871

Program Conversion | 12 September, 2017

Make Fuji provide the software, and convert some programs as part of the deal.

Mac

reply »

#78875

Program Conversion | 13 September, 2017

Totally agreed with Mac on this one. They should either provide a software or they can convert so many programs for you.

reply »

#78876

Program Conversion | 13 September, 2017

Try Ealead Programming.

http://ealead-e.ucoz.com

Dicky name but $1000 US dollars and can convert between a very large number of late model machines. The trial however will only output ten feeders to a file, and lasts one month. Another approach if you have a text file is to convert it to CSV and then run it through my program PCBSynergy.

Available here:- http://members.iinet.net.au/~sarason/

Sarason

reply »

#79196

Program Conversion | 12 October, 2017

Hi,

ACE Translator 3000 will work for your Conversions.

reply »

JAX

#79203

Program Conversion | 13 October, 2017

Not sure you will find what you are looking for. Everyone is talking about converting the program but I think they are just talking about the x-y information. The problem is in the part/package data. Different Machines require different information, use different nozzles / heads / cameras / etc..., work with different light levels, align with laser / mechanical / vision...... Unless you can find all of the parts you need in a master library for multiple machine manufacturers (Valor has something like this), I am not sure moving the x-y data while compensating for possible origin changes even matters.

reply »

#79213

Program Conversion | 18 October, 2017

Hi,

You have 2 options: 1. You can pay for a software solutions but it can't do 100% work. You will complete manually a conversion (between 5%-50% based on a complex of your board, type of component and other problems). 2. Do it by your self using Excel and Machine teach of components. You can extract by Copy-Paste (Ctrl-C + Ctrl-V) from Samsung software to Excel. And, import an excel file to the Fuji solution.

Best Regards, Alexei www.proventustech.com

reply »

IPC Training & Certification - Blackfox

SMT in-printer dispensing