Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Philips CSM84 Communication Error (Err125)

Views: 1897

#76471

Philips CSM84 Communication Error (Err125) | 18 October, 2016

Communication parameters is correctly. DB25(Male) to DB9(Female) wiring as is manual, lenght 1m, shielded. When i try read mcf CSMUTB program stoped with error "CSM not respond" or "Cant established communication", CSM84 display 125 Communication error. What's the problem?

reply »

#76506

Philips CSM84 Communication Error (Err125) | 27 October, 2016

> Communication parameters is correctly. DB25(Male) > to DB9(Female) wiring as is manual, lenght 1m, > shielded. When i try read mcf CSMUTB program > stoped with error "CSM not respond" or "Cant > established communication", CSM84 display 125 > Communication error. What's the problem?

Hi,

Try to disconnect the GND shield wire in the csm 84. I have also this problem. After disconnection it works without Problems.

reply »

table top X-ray inspection

PCB Soldering Tools